ANEMOI AIRPRO 400 L, Руководство по установке

Страница: 16 / 29

AIRPRO [L]
16
5.7 Safety Cable Installation
The motor box contains a safety cable that must be installed to prevent the engine from failing after assembly. To
do so, please use four
Wire Rope Clamp and the Safety Cable . If the fan is mounted on a steel or concrete beam,
wrap the beam with the safety cable in a closed loop as shown below:
4-1. Route safety cable wrap it around
the I-beam and thought the Mounting
Base, securely lock the wire rope
clamp.
4-2. The safety cable must be
tightened as picture shows, make
sure the U-shaped inside the wire
rope clamp is tighten to the short side.
(Recommended Tightening Torque:
12Nm)
Use 4 x Wire Rope Clamp and 1 x
Safety Cable.
If the fan is anchored to a concrete ceiling, please drill the ceiling to install a pin that can support the weight of the
fan at a distance of 20-
c fro t f n’ ount ng fr . Su qu ntly, wr p t w t t t l f ty
cable in a closed loop.
SAFETY!
Ensure that the safety cable is correctly installed to prevent the fan from falling. Failure to do so may
result in serious personal injury or death and equipment damage.
Make sure the Wire Rope Clamp are properly tightened. Failure to do so may result in equipment damage.