AIRLUX
8
2.8
Mounting the Blades
The engine has six projections to secure the blades. One of the end of the blades has two holes on it. Use this
end to insert the blade in the projection. Secure the blade to the engine using the two screws, nuts and
washers provided as follows:
Insert the end cap on the opposite end of the blade and secure it with a screw as shown below:
2.9
How to Pair the Remote Control
You need to set up the receiver for the fan to work properly. Please, follow the following steps:
1. Insert a 12V battery (type 23A) in the remote control.
2. Connect the fan to the power supply. Before 30 seconds, press the start button of the remote control
and hold it for 5 seconds.
3. You will hear a beep once the devices are properly paired.
