AndyMark Linear Servo Скачать руководство пользователя страница 2

Страница: 2 / 4

www.andymark.com

Step 1:

Attach the Slide Block to the

Servo Bracket using two 10-32 Phillips
Head Screws.

Step 2:

Screw the Encoder into place.

Step 3:

Slide the Servo through the

servo slot on the Bracket.

Step 4:

Attach and tighten four sets of

8-32 Screws with their respective Nylon
Nuts to set the Servo in place.

Step 5:

Attach and screw on the 12

Tooth Servo Gear onto the Servo.

Linear Servo Assembly/Mount

Содержание Linear Servo

Страница 1: ...1 www andymark com Linear Servo Shifter Assembly Mount Guide for...

Страница 2: ...ws Step 2 Screw the Encoder into place Step 3 Slide the Servo through the servo slot on the Bracket Step 4 Attach and tighten four sets of 8 32 Screws with their respective Nylon Nuts to set the Servo...

Страница 3: ...ath Step 7 Slide and push the Slide Rack onto the Slide Block rotating the gear while pushing into position Step 8 Place the washer on Shoulder Screw and screw into Slide Block through the Slide Rack...

Страница 4: ...4 www andymark com Step 10 Line the Servo Shifter holes up to the Motor Plate and attach using two 10 32 Phillips Head Screws Step 11 Screw the 28 Screw with the Rubber O Ring into the Shifter block...