4
am-4671 UPPER HUB Replica for RAPID REACT (SM) Assembly Guide v1.0
6.
Insert plastic Upper Hub Panels (item 6, qty. 4), one piece at a time, bending and ensuring it lands on all 6
hooks on the Vertical Ribs. Pieces will need to be pressed down firmly to seat where they overlap the adjacent
Panel piece. The last piece of Panel plastic will tight to get in place. Use cable ties to hold plastic into position.
7.
Attach Upper Hub Vision Angles (item 8, qty. 3 per Plastic piece) to the Upper Hub Vision Plastic (item 7, qty.
1), using the 5/8” screws (item 12, qty. 3 per Plastic piece) and ¼-20 nuts (item 10, qty. 3 per Plastic piece).
Attach 5” x 2” Vision Tape as shown (Item 14, qty 4 per Plastic piece). Vision tape is not included.
8.
Attach assembled Upper Hub Vision Angles (qty. 4 assemblies) to the Large Ribs at the top of the Hub using
the 1” screws (item 13, qty. 12) with nuts (item 10, qty. 12) and washers (item 11, qty. 12) on the bottom of the
plastic. Use cable ties at each Plastic joint, shown at item 9 below (qty. 8). Ensure the Vision Plastic is not
upside down. Extra screws and nuts are for attaching agitator, (am-4674, sold separately, not included in
Upper Hub)
6
10
7
12
8
14
13
10
9
