&Tradition Isole NN1A-NN1G, Инструкции

Страница: 3 / 5

Step 1
Make sure that all parts listed are supplied and accounted for. See part
list next to overview image on the previous page. Please note that there
are two different bolt length and that they have different placements.
Step 2
First, turn the seats, back and armrest upside down for better access and
easier assembly.
Step 3
Seats
Start by assembling legs to the seats.
Locate the correct leg (see overview image), place it on the bottom of
the seat and align the holes.
Insert the supplied M6x25 bolts (long bolts) into the holes and tighten
using the supplied tool.
Step 4
Back & armrest
Once the legs are fastened to the seat, locate the corresponding back or
armrest (see overview image).
Insert the bottom pin into the leg and align the holes.
Insert the supplied M6x20 bolts (short bolts) into the holes and tighten
using the
supplied tool.
Step 5
Table
Lastly, locate the corresponding sidetable, if included (see overview image).
Place it beneath the leg and align the holes.
Insert the supplied M6x20 bolts (short bolts) into the holes and tighten
using the
supplied tool.
Step 6
Once all the parts have been assembled and fastened carefully flip the
module around.
ATTENTION: If the module consists of more than two seats more than
one person is needed to flip it around, in order to avoid deformation of
the legs.
Tables Seats
Backs & Armrests
Legs
Bolts M6 Allen Keys