Contents
A Table top / round or square
B Table leg × 3 (up to Ø 90) / × 4 (Ø 91 to Ø 150 cm)
C Screw × 12 (up to Ø 90) / × 16 (Ø 91 to Ø 150 cm)
D Allen Key
Unpack the table and ensure all parts pictured are included.
Please read these instructions carefully and retain them for future
reference to ensure that the table is used correctly. For your own safety,
please study each step of this instruction manual. &tradition is not
responsible for any faults or damages caused by not following these
instructions correctly.
Safety precautions
- Dispose of plastic bag from packaging and do not allow children to play
with it.
- The table is only intended for interior use.
- Handle table tops with care in order not to scratch surfaces.
- Power tools can be used to assemble the table. Be careful not to
overtighten or damage screw or thread.
- Two or more persons are needed to turn table around once assembled.
- Spilled liquids of any kind should be removed immediately from the table
top as it may penetrate the surface treatment and cause damage to it.
Cleaning instructions
- Solid wood table top
For daily care, dust oiled furniture with a soft dry cloth. Cleaning can
be done using a soft cloth wrung in lukewarm water following the wood
grains and dried immediately with a dry cloth following the wood grains.
For more severe cleaning a soap specifically developed for oiled wood can
be used. Follow the instructions on the packaging of the cleaning product.
To maintain the look and silky feeling of oiled wood, regular re-oiling is
recommended. Re-oiling should be done when the wood starts to appear
dry or faded. Usually, reoiling four times every year is sufficient.
-
Veneer table top:
Avoid using cleaning detergents and abrasive cleaning
agents, as they may damage the surface of the wood. Avoid placing
wooden furniture in direct sunlight, excessive heat or humidity.
-
Laminate table top:
Laminate is a hard-wearing and maintenance free
material used for table tops in the &tradition collection. Laminate can be
cleaned with a soft cloth wrung in a mild solution of lukewarm water and a
universal cleaning detergent. Always wipe over with a dry soft cloth after
cleaning. For difficult stains such as coffee or tea use a nylon bristle brush
with mild household cleaner or detergent, rinsing with clean water and
repeating as necessary. Rinse thoroughly with water.
-
Linoleum table top:
Table tops with linoleum offers a soft touch surface
that does not feel as cold and hard as laminate. Regular cleaning is done
with a soft cloth wrung in a mild solution of lukewarm water and a universal
cleaning detergent. Avoid placing sharp objects on the surface as this may
scratch the surface. It is recommended to use trivets or coasters under
flowerpots, vases, cups etc.
-
Metal base:
It is recommended only to use a soft dry cloth to clean plated
and powder coated surfaces but in case more severe cleaning is necessary,
a soft cloth wrung in lukewarm water can be carefully applied. Always dry
immediately after cleaning with a soft dry cloth.
In Between
Round and square top
with wooden legs
B
B
A
A
D
C
C
Step 1
Place table top (A) upside down. Please make sure to place table top on soft
surface, so that table top will not be damaged during assembly.
Place legs (B) on table top, aligning each leg with all four holes as illustrated.
Step 2
Place the screws (C) in the appointed holes and fasten with Allen Key (D)
Repeat the task for the remaining legs.
