Andrew Corporation
Proprietary – Use pursuant to Company Instruction
7 of 8
The following table shows the pin out for the D-sub connector including the alarm pins.
Signal Description
Pin
Number
Manual Control
Control ON/OFF
1
GND Ground
2
PA-Enable-Actif +
Control
3
PA-Enable-Actif -
Control
4
PA_Presence_Reset
Towards Micro Controller
5
GND_Presence_Reset Ground
6
Reserved
Not allowed for the MCPA
7
GND Ground
8
Reserved
Not allowed for the MCPA
9
Reserved
Not allowed for the MCPA
10
GND Ground
11
Reserved
Not allowed for the MCPA
12
Red LED
LED
13
UART TX + (TRM to
MCPA)
Exchanged Information
14
UART TX - (TRM to
MCPA)
Exchanged Information
15
Reserved
Not allowed for the MCPA
16
UART RX + (MCPA to
TRM)
Exchanged Information
17
UART RX - (MCPA to
TRM)
Exchanged Information
18
GND Ground
19-24
Green LED
LED
25
Table 3: Pin out for D-Sub connector
