Andrew AE04A-D1246-001 Скачать руководство пользователя

Страница: 62 / 63

Wireless Innovations Group

2601 Telecom Parkway

Richardson, Texas 75082

400/800 MHz Fiber Optic & RF Fed Bi-Directional

Amplifier Operations / Maintenance Manual

DWG NO:

AE04B-A1669

Rev: B

Date

: 06/18/2008

Page

of 63

7.4.3 Alarm Module Removal (Optional Equipment)

Not applicable if alarm module is not being used.

Verify AC power to the BDA has been removed.

Disconnect the system RF and Fiber Optic cables.

Loosen the screws and remove the blank front plate right of the Alarm module.

Loosen the module top and bottom wedge locks using a 9/64” allen wrench.

Loosen the module front plate screws.

6 Slowly but firmly, pull the module straight out of the chassis. Take care not to twist or

turn the module during withdrawal. The RF connectors on the rear of the module are

easily damaged if handled carelessly.

7.4.4

Alarm Module Installation (Optional Equipment)

Not applicable if alarm module is not being used.

Verify AC power to the BDA has been removed.

Disconnect the system RF and Fiber Optic cables.

Carefully align module into its location and then slowly push the module directly straight

fully into its position. Take care not to twist or turn module during installation.

Fasten the module front plate screws.

Tighten the module top and bottom wedge locks using a 9/64” allen wrench.

Reinstall the blank front plate right of the Alarm module.

Verify module connections have been made prior to connecting AC power. Reconnect

the system RF and fiber optic cables.

7.4.5 Module Transportation

To maintain the operation, performance and reliability of each module they must be stored

and transported properly. Exercise caution when handling the modules, if the units are

dropped or knocked the sensitive internal components can become damaged and the duplexer

modules can become misaligned. Any active module not installed in a BDA must be kept in

an anti-static bag or container. Any module sent back to Andrew Corporation for

investigation/repair must be shipped in a anti-static container. Please contact Andrew

Corporation quality department before returning a module.

Содержание AE04A-D1246-001
































































Результаты поиска

Содержание AE04A-D1246-001

Отзывы:

Похожие инструкции для AE04A-D1246-001

Бренды по названию

Популярные бренды

Andrew AE04A-D1246-001, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание AE04A-D1246-001

Отзывы:

Похожие инструкции для AE04A-D1246-001

Бренды по названию

Популярные бренды