6
Using the appliance
How to use:
1.
Plug the appliance into the socket and switch on at the mains.
2.
Align the juicing pitcher and the pulp pitcher to the correct outlets and ensure
the cap on the juicer outlet is open and clear of any debris to avoid any spillage.
3.
Insert ingredients into the food chute.
4.
Using the
on/off/rev
button, gently switch the appliance to
on.
5.
Gently push the ingredients into the appliance using the food pusher.
6.
If the juicing is hindered or begins to clog, gently press and hold the
on/off/rev
button to
rev
. The juice extractor will begin to rotate reversely and will detach
and push upwards the trapped pulp. If the reverse function is unable to dislodge
the pulp, switch the appliance off at the base unit, then switch off at the mains
and unplug the appliance from the socket, allow to fully cool and disassemble
the juicer to clean.
7.
When the juicing is complete, ensure that the
on/off/rev
control switch is set to
the middle
off
position.
Before first use
•
Thoroughly clean all parts in contact with food in warm soapy water, rinse and
dry thoroughly before using.
Please note:
This appliance has a built
-
in safety lock. This feature ensures that you
can only use the appliance if you have assembled the juicer correctly on the base
unit. Please ensure all parts are assembled correctly before use.
•
Wash fruit and vegetables thoroughly before juicing.
•
If juicing fruit with stones or hard seeds, please ensure to pit the fruit before
inserting into the appliance. Remove any hard inedible skins such as the skins of
melons, pineapples, mangos etc.
•
Do not place whole fruit or vegetables into the juicer. We recommend slicing
harder fruits and vegetables such as carrots into pieces less than 2cm in
diameter.