4
How to use your espresso maker
Rinse thoroughly with warm soapy
water before first use. Remove the
gasket and wash it thoroughly
before use. Do not drink the very
first cup of coffee you make with
the appliance.
Unscrew the top from the base.
IMPOTANT: Fill the base with fresh
water to a level below the brass
steam release valve.
4. Add the ground coffee of your
choice to the inner filter and fill it to
the top.
5. Place the filter in the base section
and screw the top section on
tightly.
6. Heat the appliance on a moderate
heat, the water will rinse and filter
through the coffee and fill the
upper part of the coffee maker.
7. During this (percolating) time, do
not open the lid as hot coffee could
bubble out and potentially scald.
8. When the coffee has percolated
through and the top section is full,
remove it from the heat source
immediately.
Care and Use Instructions
Always dry the espresso maker
carefully before storing it away. Do not
leave water in the espresso maker
when it is not in use. Always ensure
that the espresso maker is cool before
dismantling it for cleaning. Check the
seals (gasket) periodically, depending
on the use they may need to be
replaced within a year, a free gasket
replacement is already included with
your espresso maker.
Never use anything other than ground
coffee beans in this appliance, as it
will clog the filter plate.
Use coffee specifically for a Moka
coffee maker. Do not use coffee that
is too finely ground, or instant coffee
granules.
Ensure the valve, filter and washer are
in good condition. You may have to
periodically change the filter and
washer. If they are not clean, it could
prevent the water from being forced
into the top chamber—which could
damage the percolator.
For use in hard water areas, please
use filtered water with this coffee
maker.
Do not pack the coffee grounds too
Max Water
Level
