5
CHECK ALCI SAFETY FEATURE EVERY
TIME YOU USE THE DRYER
Due to continuous improvements,
the appearance of your Safety Plug
may vary from the illustration
above.
This unit is provided with an
appliance leakage current
interrupter (ALCI) safety device
built into the plug. This device will
make it inoperable under some
abnormal conditions such as
accidental immersion in water. If
the appliance is immersed in water, do not attempt to reset the ALCI
safety device. Please take the unit to the nearest service facility for
examination.
The ALCI safety device is equipped with a test button so that its
operation can be checked.
TO USE:
1. Press the reset button on the
ALCI safety device.
2. Plug appliance into AC
electrical outlet.
3. Then press the test button.
The reset button will pop out.
This verifies that the safety
device is operating properly.
4. Should the reset button not
pop out, do not use the unit,
Contact Consumer Service for
examination and repair
(See Warranty Section).
5. Press the reset button to re-
activate your ALCI safety
device and use your
appliance.
NOTE:
Be sure to repeat this test
every time you use the hair dryer
to confirm ALCI is operational.
DRYER STOPPED
Disturbances in your electrical
current can trigger the Safety
Plug. Press the RESET Button on
the unit so it clicks. Your dryer
will resume operation.
