Enhanced features (for Bluetooth
phones with hands-free profiles)
To
Press and Hold
Redial last number
the volume control
button [ - ] for 3
seconds and then
release.
Reject an incoming
Call
Adjust the volume
Answer a second
call
When you receive a
call, press and hold
the Multi-Function
Button for 3 seconds
to reject the call.
Press Volume
Control Button [+]
on the side of the
headset to increase
the volume level
and press Volume
Control Button [-] to
decrease the volume
level.
When your phone
notifies you of
another incoming
call while you are on
a call, press and hold
the Multi-Function
button for 2 seconds.
You can switch
between calls by
pressing and holding
it for 2 seconds.
supported.
To
Press and Hold
Place a call on hold
While you are on a
call, press and hold
the Multi-Function
button for 2 seconds.
To retrieve the call,
press and hold the
Multi-Function button
for 2 seconds again.
Using the phone’s
keypad.
1. Dial number with
keypad.
2. Press phone’s
“send” key.
Using voice-activated
dialing (after you’ve
set up voice tags on
your phone)
1. Press and release
Multi-Function Button
once.
2. You’ll then hear the
voice-activation
tone; say the name
of the person you
wish to call.
Make a call
To
Press and Hold
Ending a call
1. Press and release
Multi-Function Button
once
2.End call from
phone’s keypad
1. After you hear the
ring tone, press and
release Multi-Function
Button once
2. Answer the call
with your phone’s
keypad. You may
then need to transfer
the call to the
headset by long
pressing and
releasing the Multi-
Function Button for 2
seconds (depending
on your
phone).
Answering a call
BASIC OPERATIONS
Turning headset on/off
Meaning of the Indicator Light
* Depending on the Phone Type and usage, Actual time may vary.
To
Press and Hold
You Will Hear
You Will See
Turn Headset On
the Multi-Function
Button for 4 seconds
until you see 3 Blue
flashes on the indicator
light, then release.
a Tone
the Indicator Light will
flash while the power is
on (see Meaning of the
Indicator Light Table).
Light
Tone
Status
Quick series of 2 Tones (When
Active model starts).
Flashes Blue once every
second.
The Headset is in Active
Mode
- The Headset has an Active
call in progress
- You can talk up to 8 hours*
5 Tones every 20 seconds.
Flashes in Red instead of
Blue.
The Headset battery is low
- There is only 3-5 minutes
of Talk time left.
Quick series of 2 Tones (When
Standby model starts).
3 consecutive short Blue
flashes.
The Headset is in Standby
Mode
- The Headset is waiting for
a call
- The Headset can be in
Standby mode for up to 150
hours*
Turn Headset Off
the Multi-Function
Button for 4 seconds
until you see 3 Red
flashes on the indicator
light, then release.
two Tones
the Indicator Light is off.
No Tone.
2 consecutive short Blue
flashes.
The Headset is “on” but not
paired.
! IMPORTANT:
Do not hold the Multi-Function Button
down too long when making, ending,
or answering a call. This should only
be a quick push, so you don’t put the
headset into pairing mode by accident.
Enhanced features (for Bluetooth
phones with hands-free profiles)
Enhanced features are available for
phones that support the hands-free
speech dialing Bluetooth profile. Check
your phone’s instruction guide or contact
the phone manufacturer if you are not
sure if your phone supports the speech
dialing Bluetooth profile.
Once you’re done pairing, the following
headset features may be available:
WEARING THE HEADSET
Wear the headset on your ear. In general,
you will get better performance when
there are no obstructions (including
parts of your body) between the headset
and the phone. Depending on what
ear you are going to wear the headset,
simply unsnap and rotate the ear-hook
accordingly.
