Andover Controls CMX 220, Руководство по установке

Страница: 21 / 37

Infinity CMX Installation Guide 13
5. Place the white wire under the metal plate behind the middle screw,
labeled RET.
6. Tighten the screw with a flathead screw driver.
7. Place the black wire under the metal plate behind the bottom screw,
labeled 24V.
8. Tighten the screw with a flathead screw driver.
Finding Ports for Connecting Other Cables
Figure 3 shows the inside of the CMX controller.
UserPort
Notice that the CMX has one RS-232 communication port, labeled
USERPORT.
You can attach a terminal (directly or via a modem) to this port.
USERPORT cannot connect to an LBUS or Infinet cable and cannot
connect to a modem. You may connect a printer to it, but since it is the
only port and a terminal is required, in most situations a terminal be-
longs there.
Modem Connector (Phone Jack)
The connector labeled MODEM is phone jack (RJ 11) on the left side
of the controller. You connect a telephone cable to the phone jack that
connects to a modem and either terminal or printer at a distant site.
Infinet Connector
The Infinet connector is just to the left and below from the RS-232 port
on the left side of the board.
External Speaker Connector
The speaker connector is the 2-pin connector just below the telephone
jack for the modem.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com