Andor Technology Optosplit II, Руководство пользователя, Страница: 11 / 22

Installation guide
2 Installation guide
The Optosplit comes supplied with a rectangular aperture, as shown below. This allows you to make the
best use of the camera chip area, but there is the alternative of a circular iris available.
Figure 1 : Optosplit with adjustable rectangular diaphragm
Before installing the Optosplit you will first need to install an appropriate filter cube into the filter
holder. If your Optosplit has been purchased with a full filter set pre-installed then you can skip to
section 2.2 for instructions on fitting it in the optical pathway. Instructions for installing the filter cube are
given in section 2.1.
Page 3