6
Image switching
When connecting the endoscope to the microscope, pay attention to the direction of the plug. Refer to
the schematic diagram in Figure9:
Note: 1.After the endoscope is connected to the main device, please do not swing left or right to
avoid poor contact of the endoscope; 2. The endoscope does not support functions such as remote
control, capture, and video recording.
(Figure9 Schematic diagram of endoscope interface)
After the endoscope is connected, its image does not appear on the screen immediately. You need to
press the "V" key (image switching key, Figure 8/
④
), the remote control "NTL/PAL" key has the
same function).
The process of image switching is shown in Figure 10. Through the "V" key, the endoscope image can
be switched: from small to full screen. If you don't need the endoscope image, you can continue to
press the "V" key to switch to the microscope image or not connect to the endoscope.
Press the "V" key for the first time to achieve dual-screen display; press the "V" key for the second time
to display the endoscope image; press "V" for the third time to switch to the microscope image.
(Figure10 Schematic diagram of the screen switching process)