DN:KD-7961N-SMSY01 V3.0
Operation Guide
Template version:1
6/15
Remove the batteries if the monitor will not be used for a month or more to avoid relevant damage of
battery leakage.
Avoid the battery fluid to get in your eyes. If it should get in your eyes, immediately rinse with plenty of
clean water and contact a physician.
The monitor, the batteries and the cuff, must be disposed of according to local regulations at the
end of their usage.
2. TOUCH BUTTON SWITCH
Your monitor has a touch button as equipment. Be careful not to touch the button by mistake. Keep the touch
switch in ―OFF‖ position when the monitor is not in use to avoid unintentional operation. Please keep the
touch switch in ―ON‖ position to operate the monitor. The touch switch is in ―ON‖ position, press the touch
button (START button or MEM button), you can hear the beep.
3. CLOCK AND DATE ADJUSTMENT
a.
Once you install the battery or turn off the monitor, it will enter Clock Mode, and LCD will display time
and date.
See picture 3.
Picture 3 Picture 3-1 Picture 3-2 Picture 3-3 Picture 3-4
b.
While the monitor is in Clock Mode, pressing both the ―START‖ and ―MEM‖ button simultaneously
(touch button switch in ON position), the month will blink at first.
See picture 3-1.
Press the button
―START‖ repeatedly, the day, hour and minute will blink in turn.
See picture 3-2 & 3-3 & 3-4.
While the
number is blinking, press the button ―MEM‖ to increase the number. Keep on pressing the button
"MEM", the number will increase fast.
c.
You can turn off the monitor by pressing ―START‖ button when the minute is blinking, then the time and
date is confirmed.
d.
The monitor will turn off automatically after 1 minute of no operation, with the time and date unchanged.
e.
Once you change the batteries, you should readjust the time and date.
4. VOICE SETTING
a. Ensure the touch button switch in ON position.
b. Voice language setting: In clock mode, you can select the voice language by keeping on pressing the
button ―MEM‖. Now LCD blink ―L0‖, ―L1‖, ―L2‖ … ―Ln‖
(see picture 4 & 4-1)
circularly. ―L0‖ represents
closing voice function, ―L1‖ represents language 1, ―L2‖ represents language 2,…,―Ln‖ represents
