Andis Hot Iron
Model:
STI-3
Safety & Use Instructions
•
Use iron only for its intended use.
•
Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the non-stick
sole plate.
•
To protect against risk of electric shock, do not immerse the iron in water or other
liquids.
•
The iron should always be turned to “off” before plugging or unplugging from outlet.
Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
•
Do not allow cord to touch hot surfaces. Let iron cool completely before putting away.
Loop cord loosely around iron when storing.
•
Always disconnect iron from electrical outlet when filling with water or emptying and
when not in use.
•
Do not operate iron with a damaged cord or if the iron has been dropped or damaged.
To avoid the risk of electric shock, do not disassemble the iron.
•
Close supervision is necessary for any appliance being used by or near children. Do not
leave iron unattended while connected or on an ironing board.
•
Burns can occur from touching hot metal parts, hot water, or steam. Use caution when
you turn a steam iron upside down–there may be hot water in the reservoir.
How to Dry Iron
1.
Turn the adjustable steam dial to “dry”.
2.
Plug in iron.
3.
Turn temperature control dial to desired temperature. Allow two minutes for iron to
reach desired temperature.
How to Steam Iron
1. Unplug iron. Using a container, slowly pour tap water into the water tank opening
until the “max” fill line has been reached. Please note: Do not fill iron directly from the
faucet.
2. Turn adjustable steam dial to “dry”. Plug iron into outlet.
3. Turn temperature control dial to desired setting.
4. Allow two minutes for the iron to reach desired temperature. 5. Set adjustable steam
dial to desired setting.
Water: Please use ordinary tap water. If you have extremely hard water,
alternate between tap water and distilled water for use in the iron.
Содержание STI-3
Страница 3: ......
