Operating Manual – V3.39
CENTOR EASY Force Gauge
- 7 -
5.
Measure unit
To change the measure unit, just press “UNIT” button.
When the force gauge is tooled up with an external sensor, it detects the type of sensor connected
and displays the corresponding units.
6.
Peak values
The CENTOR automatically calculates peak values (maximum and minimum) and systematically
displays them on line 2. Pressing “MAX” button makes max. value, min. value and current value
successively display (as well as a calculation if it has been set).
7.
Backlit
You can turn on the backlit by pressing “
” button.
When using the force gauge on battery, the backlit turn automatically off after 3 min of operating.
The total autonomy of the CENTOR will be reduced when the backlight is turned on.
When the gauge is used with the power plug, the backlight does switch off by pressing back on the
backlight button.
