ANDI PYROLYTIC AX100 MTPC, Инструкция по использованию и уходу

Страница: 6 / 12

Setting:
Select a function by pressing the function button and set the required time with
+
and
-
buttons.
+/
-
Buttons:
Pressing the
+
button increases the time set, pressing
-
decreases it. The count-up or countdown speed increases the
longer the button is held in the appropriate position.
Setting Time of Day:
Select Time of day function by keeping
C
and
S
buttons pressed together while setting time of day with
+
and
-
buttons. Any programme, which has been set, is cancelled and the outputs switched on.
Manual Operation:
On six buttons Elect. Programmer just press the button and the Hand symbol will come on. On five buttons Elect.
Programmer press
C
and
S
buttons together. The relay contacts will switch on. The
“A”
symbol will be erased, the
cookpot symbol
C
will come on. On both cases any programme, which has been set, is cancelled.
Semi-Automatic Operation with cooking duration:
Select
C
function and set required end time with the
+
and
-
buttons. The
“ A ”
and cookpot
C
symbols appear.
The relay output becomes active. If time of day = cooking end time the relay output and the cookpot symbol are
switched off. The audible signal sounds and
“
A
”
blinks.
Fully Automatic Operation:
Select
C
function and set required duration with the
+
and
-
button. The
“A”
symbol appears. The relay is
switched on and the cookpot symbol appears. Then select
S
function and the earliest possible end time is displayed.
Set the required end time with the
+
and
-
buttons. The relay and the cookpot symbol are switched off. The
cookpot symbol appears again when time of day = the calculated start time.
At this point you can put the food in the cooking chamber, set desired oven function and cooking temperature. After the
automatic programme has ended, the symbol
“
A
”
blinks. The audible signal is heard and the cookpot symbol and the
relay are switched off.
Minute Minder:
Select
B
button and set required time with
+
and
-
button. As the time set elapses the bell symbol is displayed.
After the time set has elapsed, the audible signal sounds.
Audible Signal:
The audible signal (1 Hz interval) sounds at the end of a minute minder cycle or of a cooking programme for a period of
7 minutes. The signal can be cancelled by pressing any function button. Pressing the
-
button without having
previously selected a function the frequency of the signal changes. A selection from 3 possibilities can be made. The
selected signal is audible as long as the
-
button is pressed.
Programme Start and Verification:
A programme, which has been set, is carried out after setting the time required. The “time-to-turn” can be verified at any
time by selecting the appropriate function.
Setting Error Identification:
The setting is incorrect if time of day is in between the calculated cooking start and end times. If an error has been
made, this will be indicated by the audible signal and by the symbol
“ A ”
flashing. The faulty setting can be corrected
by changing one or both functions.
Cancelling a Programme:
A programme can be cancelled by selecting the manual function. After a programme, which has been set comes to an
end, it is automatically cancelled.
PROGRAMMED COOKING MODE: Turn knob right, clockwise, and select desired cooking time. At end of
cooking time, oven will be automatically turn off and a beep signal will be heard. Then, to stop the beeping signal you
must push timer knob.
6