PYROLYTIC CYCLE (AX100MTPC2X only)
Indicates when Oven self-cleaning cycle is on. see figure 7. Only on Pyrolytic ovens
OVEN DOOR BLOCKING SYSTEM (AX100MTPC2X only)
Indicates when Self-cleaning Door Locking System is on. see figure 8. Only on Pyrolytic ovens.
ELECTRONIC PROGRAMMER
The clock has a maximum setting of day time of 23h 59 Min.. Cooking End Time of 23h 59 Min.. Minute minder of 23h
59 Min.. and Cooking Period Time of 10h.
Functions:
see figure 9.
Cooking duration
C
. Cooking end time
S
. Time of day. Minute minder
B
. Minus
-
. Plus
+
. Manual
selection
C
-
S
. Automatic programme
A
. Manual mode
.
Displays:
see figure 9a/9b.
4-digit 7-segment display for time of day and switching times. “Dialogue” display to identify condition of timer.
Setting:
Select a function by pressing the function button and set the required time with
+
and
-
buttons.
+/
-
Buttons:
Pressing the
+
button increases the time set. pressing
-
decreases it. The count-up or countdown speed increases the
longer the button is held in the appropriate position.
Setting Time of Day:
Select Time of day function by keeping
C
and
S
buttons pressed together while setting time of day with
+
and
-
buttons. Any programme. which has been set. is cancelled and the outputs switched on.
Manual Operation:
On six buttons Elect. Programmer just press the
button and the Hand symbol will come on. On five buttons Elect.
Programmer
press
C
and
S
buttons together. The relay contacts will switch on. The
“A”
symbol will be erased. the
cookpot symbol
C
will come on. On both cases any programme. which has been set. is cancelled.
Semi-Automatic Operation with cooking duration:
Select
C
function and set required end time with the
+
and
-
buttons. The
“
A
”
and cookpot
C
symbols appear.
The
relay output becomes active. If time of day = cooking end time the relay output and the cookpot symbol are
switched off. The audible signal sounds and
“
A
”
blinks.
Fully Automatic Operation:
Select
C
function and set required duration with the
+
and
-
button. The
“A”
symbol appears. The relay is
switched on
and the cookpot symbol appears. Then select
S
function and the earliest possible end time is displayed.
Set the required end time with the
+
and
-
buttons. The relay and the cookpot symbol are switched off. The
cookpot symbol appears again when time of day is equal to the calculated start time.
At this point you can put the food in the cooking chamber. set desired oven function and cooking temperature. After the
automatic programme has ended. the symbol
“
A
”
blinks. The audible signal is heard and the cookpot symbol and the
relay are switched off.
Minute Minder:
Select
B
button and set required time with
+
and
-
button. As the time set elapses the bell symbol is displayed.
After the time set has elapsed. the audible signal sounds.
5
9880018600 E OVEN ANDI 05-2007
