Control panel
Air vent
Ceramic plate
Air entry
Heating zone selection key
ON/OFF
Timer key
System key
Boost
Induction hotplate appearance
Power regulating key
1
2
3
4
Schematic diagram of the control panel
If the cable is damaged or to be replaced, the operation must be
carried out the by after-sale agent with dedicated tools to avoid
any accidents.
If the appliance is being connected directly to the mains an omnipolar
circuit-breaker must be installed with a minimum opening of 3mm
between contacts.
The installer must ensure that the correct electrical connection has
been made and that it is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised
technicians only.
5
