4
Cautions
1.
The ceramic cook
top
must be installed by qualified personnel
or technicians. Please
never conduct the operation by yourself.
2.
The ceramic cooker hob shall not be mounted to cooling equipment,
dishwashers and rotary dryers.
3.
The ceramic
cooktop
shall be installed such that better heat radiation
can be ensured to enhance its reliability.
4.
The wall and induced heating zone above the table surface shall
withstand heat.
5.
To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
6.
A steam cleaner is not to be used.
If the cable is damaged or to be replaced, the operation must be
carried out the by after-sale agent with dedicated tools to avoid
any accidents.If the appliance is being connected directly to the
mains an omnipolar circuit-breaker must be installed with a
minimum opening of 3mm between contacts. The
installer
must
ensure that the correct electrical connection has been made and
that it is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised
technicians only.
The socket shall be connected according to the relevant standard
or connected to a single-pole cut-out. The method of connection
is shown in Figure (3):
Figure (3)
Voltage&frequency
220-240V
50\60HZ
220-240V 2+2-N
50\60HZ
2
1
L
Black&Brown
1
2
L1
L2
Gray
Blue
N1
N2
3
4
4
3
5
5
Wire connection
N
Yellow/Green
Yellow/Green
Gray&Blue
Black Brown
Power line connection
