Model ADF-B883
Wireless Electronic Body Scale
Connect device via Bluetooth 4.0
Download and install “Andesfit Health”
INSTRUCTION MANUAL
Battery Installation
1.
Use AAA batteries (included. Remove any plastic wrap from the batteries
before proceeding). Always replace all batteries at the same time; do not combine
old and new batteries. Do not mix Alkaline, carbon-zinc (standard) or Nickel-
Cadmium (rechargeable) batteries.
2.
Open the battery compartment on the bottom of the scale.
3.
Place the new batteries into the battery compartment according to the polarity
illustration in the compartment.
4.
Replace the battery compartment cover.
NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items, do not let
children handle batteries. If swallowed, seek medical attention immediately.
the battery if the scale will not be used for a long period of time.
Low Battery
Your scale is equipped with a low battery indicator. It will display “
Lo
” or
readings will grow dim or become irregular if the batteries need replacement.
Trouble Shooting
1.
Place your feet in the same position every time you weigh yourself. Stand still during
measurement.
2.
Weigh yourself without clothing whenever possible. Clothes can vary in weight.
3.
Move the scale to a location where it won’t be bumped. If your scale is bumped
while being activated or while in use, an inaccurate reading may occur.
4.
For the most consistent readings, weigh yourself at the same time of day. Allow for
weight fluctuations due to food or drink in your system.
General Operation
1.
This scale operates on 3“AAA” batteries, which are included. Please see
“Battery Installation” section of this manual for installation instructions. Also,
some models have a static cling label on the lens to prevent scratching.
Please remove before use.
2.
Your scale has been set at the factory to read weight in pounds (lb). You
may select kilograms (kg) or stone (st lb) (1 stone = 14 pounds) units of
measurement by pressing the “kg-lb-st” button on the bottom of the scale.
3.
Place scale on flat, hard surface. Carpeted or uneven floors may affect
accuracy.
4.
Step on the scale (disregarding the reading) and step off. This process
insures the scale is set and is now ready for use. Do this whenever the scale
is moved. At all other times step straight onto the scale.
5.
Step onto the scale platform and remain still. The display will count up to
your weight. The scale display will flash thrice when the weight is locked.
Your weight is now displayed.
6.
The scale will turn off automatically.
5.
The maximum capacity of this scale is 330 lbs / 150 kg / 23 st 8 lbs. Should “
Err
”
appear on the display during a weighing, this indicates that the maximum weighing
capacity of the scale has been exceeded. Remove the weight immediately;
otherwise, permanent damage may occur.
Warning indication
LCD display means overload.
Lo means power not enough.
Lo
Err
