English
Svenska
Norsk
6
Instructions
Input
Input mode is initially set to USB/SD when powered on.
Press INPUT to change the input/playback mode. The input
order is Bluetooth, USB, SD, AUDIO IN
Bluetooth and Pairing
Press the Input button to switch to Bluetooth input. The
Bluetooth indicator LED will start blinking, to indicate that
the Bluetooth speaker has entered pairing mode. Make
sure that Bluetooth is activated on the transmitting blue-
tooth device (such as smartphone, tablet or computer),
then go into the bluetooth settings of the transmitting blue-
tooth device and search for PLS 2.1 and connect with the
input pass code ‘0000’. The Bluetooth speaker will make
a sound once the devices have been successfully paired.
The LED will stop blinking and will instead be statically lit.
´
If PLS 2.1 cannot be found, try to turn Bluetooth off and
on again on the Bluetooth device. Switch the Bluetooth
speaker input mode from Bluetooth to AUX and back
again by pressing the input button. Try pairing again.
´
If the Bluetooth signal is weak, the Bluetooth speaker
will automatically attempt to re-connect with your de-
vice. Otherwise follow above steps to pair again man-
ually.
´
The Bluetooth speaker will automatically connect with
the paired device. If you want to pair with another de-
vice, turn off Bluetooth or disconnect from the paired
device.
Battery Charge/Low Battery LED
When the battery is fully recharged, the LED will turn off.
When charging, the LED will be lit in RED. When the battery
is low, the LED will be blink in RED.
Power/Standby Indicator LED
Once the Bluetooth speaker is turned on, the LED will be lit
in GREEN. The LED changes to red colour once the speak-
er enters standby mode. The speaker goes into standby
mode after a few minutes of no signal or activity in order to
save power.
AUX (AUDIO IN/USB/SD Input) Indicator LED
The LED will be lit when the input mode is AUDIO IN, USB
or SD.
Bluetooth Indicator LED
When the Bluetooth speaker is set to Bluetooth input, the
LED will be lit.
Backward, Play/Pause, Forward
These buttons are used to control music playback when the
input mode is USB, SD or Bluetooth. These buttons can not
control AUDIO IN.
