12
Chapter 9:
Network
Use this menu to configure your local network settings.
1. Wired Lan Setup
- DHCP IP (AUTO)
Select to obtain IP address automatically (DHCP must be
enabled on your Router).
- FIX IP (MANUAL)
Select to manually input the IP Address, Subnet Mask, De-
fault Gateway, and DNS Server IP Address.
2. Wireless Setup
There are 3 modes for you to select, Infrastructure (AP), Peer
to Peer (Ad Hoc) and WPS (AP) mode. Follow the prompting
message on the screen and press OK to choose Infrastruc-
ture (AP), press Red button to choose Peer to Peer (Ad Hoc)
or WPS (AP) mode.
This player can store up to three wireless network connec-
tions. Press OK to connect AP, press Return to cancel, press
Zoom to rescan the AP’s and press OK to choose Peer to
Peer (Ad Hoc) or WPS (AP).
3. Infrastructure (AP)
Infrastructure mode is used to connect computers with wire-
less network adapters. Please take the following steps to
configure your wireless network.
Step 1. Scanning AP (Access Point) in your network.
Follow the prompting message on the screen and press the
Zoom button to select Infrastructure (AP) mode and update
the access points list, and all SSID will be displayed on the
screen.
Step 2. Input WEP / WPA key.
Select one of the wireless networks from the AP list. Press OK
and then input the encryption keys via the virtual keyboard.
Press the navigational buttons to select, OK to input, FFWD to
move cursor left, FRWD to move cursor right, Zoom to switch
between uppercase and lowercase, Stop to delete a charac-
ter, Green to change the language of the virtual keyboard, and
OK to confirm and to start testing the connection.
The testing process will take a while, please be patient. If the
test is ok, the network information (Profile Name, IP address,
Subnet Mask, Gateway, etc.) will be displayed on the screen.
Содержание Map 3.0
Страница 1: ...User Manual English Svenska Norsk...
