Andersson CEM 3.0, Руководство пользователя

Страница: 7 / 28

7 English
Operation
BEFORE FIRST USE:
1. Check that all accessories are complete and the unit is not
damaged.
2. Clean and dry all detachable parts thoroughly according to the
section “CLEANING AND MAINTENANCE”, then fill water into
water tank to the MAX level and follow the operation of “USING
YOUR COFFEE MAKER” to brew water for several times
without coffee powder, then discard the water.
USING YOUR COFFEE MAKER:
´
WARNING : The funnel and carafe must be assembled well in
position before brewing.
1. Open the water tank cover and fill the water tank with drinking
water and then close the water tank cover.
NOTE: The water level should not exceed MAX level as indicated
on the water gauge.
2. Place the funnel into the funnel support, make sure it is
assembled correctly.
3. Add coffee powder into filter and place it into funnel. Usually a
cup of coffee needs a level spoon of coffee powder, but you
may adjust according to personal taste. Close the funnel cover
completely.
4. Insert the carafe onto warming plate horizontally.
5. Plug the power cord into the outlet.
6. Press the “ON/OFF” button to start the appliance.
´
WARNING: Do not lifts the funnel during the coffee brewing
process., the hot water may erupt.
Do not touch the funnel lid trim pieces during the coffee
brewing process.
7. Remove out carafe to serve when finish brewing.
NOTE: You can just take out carafe at any time. At that time,
the appliance will stop dripping automatically. But the time
cannot exceed 30 seconds.
8. When the process is finished, if you do not want to serve
immediately, the coffee maker will enter into keep-warm
condition automatically if it is energized, and then the coffee
can be kept warm in the warming plate.
NOTE: The appliance will be cut off power automatically within
30 minutes. The display will show the remain time from 30
minutes to 0:00.
9. Always turn the coffee maker off and disconnect the power
supply when not use.
10. After each brewing, remember to empty the water remained in
the boiler. If not, the water remained in the boiler will produce
abnormal odor and white powder will came out. After empty the
boiler, replace the funnel and filter.