English
Svenska
Norsk
9
Æ
Instructions for Remote
Operation
Press the
-icon on the remote control to activate it. The
LED indicator on the remote control will be lit to indicate that
the remote control is active.
If you move your wrist, the cursor should follow your movement
on the screen of the Android stick or the connected device.
The remote will enter power-saving standby mode after 2
minutes of inactivity. To activate it again, simply press the
-button.
Pairing
If the cursor disappears from the screen, the remote might
have lost contact with the USB receiver. Unplug the USB re-
ceiver from the Android Smart-TV stick, press and hold left
and up direction button simultaneously. When the LED light
starts to flash, release the buttons and plug the USB receiver
back into the stick. When the LED light stops flashing, the
pairing was successful.
Resetting the remote
If the remote does not work, there might be something wrong
with the software. You can reset the remote by using a small
pin and inserting it into the hole on the back of the remote.
