Anderson RBM Series, Руководство оператора

Страница: 72 / 87

72 Operator's Manual – Self-Loading Trailer Anderson Group
7.5 Tire pressure
Check the tire pressure before each use. The pressure should be 3.1 bar (45 psi).
7.6 Maintaining and adjusting the axles
7.6.1 Assembling and attaching the wheels
Your trailer axles have washer nuts (model with the optional brakes) or tapered nuts (model without
the optional brakes), as shown in Figure 33. Table 19 shows the correct tightening torque for the
socket and wheel stud dimensions. The last two columns in Table 19 show the length of the lever
and the force to use when a torque wrench or pneumatic drill cannot be used.
The holes in the rim must be countersunk to fit the spherical part of the washer or the tapered part
of the nut. The nuts are tightened once the spherical part of the washer or the tapered part of the
nut is in the countersunk hole.
Figure 33 — Nut with Washer or Tapered Nut
Table 19 — Tightening Torque
Socket
Wheel Stud
D1 Tightening Torque
Lever
Length Force
27 mm M18 x 1.5 270 (+20/0) N m (200 (+15/0)
lb.-ft.)
450 mm (18
in.)
60 kg (132
lb.)
30 mm M20 x 1.5 350 (+30/0) N m (258 (+22/0)
lb.-ft.)
600 mm (24
in.)
60 kg (132
lb.)
1 1/16
in.
5/8-18 270 (+20/0) N m (200 (+15/0)
lb.-ft.)
450 mm (18
in.)
60 kg (132
lb.)