Turn the bale counter ON and set it up.
1) Press the ON button
2) You will have to set the counter up. To do so you will hold the Adjust Select for
3 seconds. You can then scroll through 4 menus with the same button (adjust
select)
3) Use the + and – to change the values of the menu.
4) When wrapping you will hear a buzzer from the counter on the last turn so
that you know when to stop turning the table. The number will automatically
reset once the sequence is finished.
Quick reference for correct plastic layers:
The way that we calculate the amount of plastic to apply on a bale is simple. You wrap the bale manually
once with only one layer of plastic. You do not want to see any part of the bale when you are finished. You
take the number of turns it took the table to do so and multiply it by 2 and then add one extra layer (or turn).
EX: 10 turns to completely cover the bale x 2 = 20. plus one layer = 21. This is the number you want to
program in your bale counter with.
QUICK START GUIDE
RB500
Hook the machine up to a tractor to test it.
Attach the machine’s hoses to the tractor as
shown. Be sure that your tractor is adjusted
at a flow rate of 8 GPM at 2000 PSI.
Once the bale counter is setup you can
start wrapping with the manual lever.
1- Wrapping lever
2- Tilt the table
