Anderson IFX720, Руководство оператора

Страница: 42 / 133

42 Operator's Guide – Round Bale Wrapper IFX720 Anderson Group
Figure 55 — Selecting the Fuel Tank
9.4 Remote engine ignition
This option starts and stops the engine from a distance.
This system includes a remote control and an electric box
installed on the right inside the rear frame.
NOTE: Your wrapper can also be equipped with
remote steering (see section 9.5).
The remote is not waterproof.
The remote has two buttons and an indicator light:
l
The B button starts the engine.
l
The C button turns off the engine.
l
The A indicator light blinks briefly when a button is
pushed.
Figure 56 — Remote Control Functions
Programming
If your remote engine ignition was installed at the factory,
the remote has already been configured. If it was not
installed at the factory or you have replaced the remote,
you will have to program it. To program the remote:
1. Turn the engine OFF.
2. While holding down the C button on the remote,
quickly turn the key in the ignition to ON , then
OFF , and then back to ON .
3. Let go of the C button and press the B button. The
engine will start.
Starting the engine with the remote
To start the engine with the remote:
1. Turn the ignition ON.
2. Make sure that the emergency stop button is pulled
out and the safety guard for the hoop is closed.
Figure 57 — Start and Emergency Stop Label
3. Push the B button on the remote control (Figure
56).
NOTE: If the engine does not start on the first try,
the system will automatically try two more
times.