www.Busse-Yachtshop.de - [email protected]
CONGRATULATIONS
You have purchased an ANDERSEN high quality winch. This product is a result of many years of
development and experience in producing winches for sailboats. This winch gives you a high degree of
functionality and many years of safe and easy sail handling.
GENERAL INFORMATION
PLEASE READ THIS BEFORE INSTALLING YOUR ANDERSEN ELECTRIC WINCH.
The electric ANDERSEN winch has some built-in advantages:
-
Easy to fit on your boat.
-
Template
included.
-
Special tools included.
-
Electric unit in turnable in 8 horizontable steps (45°).
-
Easy to dismantle. Winch and electric unit can be dismantled separately.
-
Winch in the usual high
ANDERSEN
quality, featuring drum, roller bearings etc. of stainless
steel.
-
Always the possibility of manual (2 speed) drive, just by inserting a standard winch handle.
No shift-bottom of any kind.
-
MODULAR POWER SYSTEM©: It is possible to exchange the 2+1 SE electric drive unit with
a Compact© electric drive unit.
Mounting Installation:
Please follow the mounting instructions.
Ensure that each hole in the deck is bedded, including the big hole in the center.
IMPORTANT: Be careful not to put bedding compound IN the thread holes in the deck plate.
Ensure that the sealing ring (O-ring) on top of the gear unit is placed in its groove.
Electric Installation:
Please follow the mounting instructions.
WARNING: Do not use smaller wire, than recommended in the diagram. This can cause malfunction of
the winch and in worst case - FIRE. The wires should always be as short as possible.
Normal Use:
The electric motor has built-in overload circuit breaker, which breaks the circuit, before the motor gets
too hot.
After a short period of cooling, depending on temperature under deck, ventilation etc., the winch will be
ready for electrical operation again.
Meanwhile, if necessary, just insert a standard winch handle, and use the winch as a 2 speed manual
winch. We recommend to remove the handle when operated electrically - from a safety point of view.
General Service Instructions:
The electric drive unit is lubricated sealed and requires no further maintenance.
The part
on
deck is a standard self tailing winch, and needs regular service. We recommend dismantling,
cleaning and lubrication
once
a year. Under extensive use, such as racing, charter or blue water sailing,
we recommend to make a further lubrication check during the one year period.
We strongly recommend always to use ANDERSEN WINCH GREASE© when lubricating your winch.
ANDERSEN WINCH GREASE© is a high quality silicone/Teflon® grease.
