Learning Instructions:
Note: All keys
on the RRDYS01 are
learnable, and an original remote is
needed. This method does not require
codes.
1. Press and hold the
&
keys simultaneously for about 5
seconds; the indicator light will
illuminate brighter and remain
bright. Release the keys.
2. Point the original remote control
head-to-head with the RRDYS01,
aligning top edges at about 1-2
inches apart (both remotes should
be pointing at each other).
3. On the RRDYS01, Press and
release the first key to be learned,
and the indicator light will now
flash slowly.
4. On the original remote, press and
hold the key that you want to learn
to the corresponding key
previously pressed on the
RRDYS01. The indicator light will
flash three times to confirm and
then remain on, waiting for the
following key to learn.
5. Repeat steps 2-4 to learn other
keys.
6. Press
&
keys
simultaneously to save and exit;
otherwise remote will exit
automatically after 20 seconds.
Delete all learned keys
1. Press and hold
&
keys
simultaneously for 3 seconds; the
indicator light will flash twice to
confirm. The deletion of all learned
keys is now complete.
Reset to factory default status
1. Press and hold
&
keys
simultaneously for 3 seconds; the
indicator will flash twice to confirm.
Reset to factory default is now
complete.
Help: Go to Anderic.com/rrdys01
Legal: Anderic is a registered trademark of Dan’s Electronics
Etc., Inc. All rights reserved. Dyson® is a registered trademark
of Dyson Limited. Dan’s Electronics Etc., Inc. has no affiliation
with Dyson Ltd.
Press & hold keys:
Fun model:
1
&
Reset to factory
default
2
&
Exit learning mode
3
&
Enter learning
mode
4
&
Delete all learned
keys
