Anderic RR2HD, Инструкция по эксплуатации

Страница: 2 / 12

ANDERIC.COM RR2HDCOM
2
Introduction
We want to thank you for purchasing the RR2HD Hospitality Remote by Anderic®. This
remote is designed with a limited selection of oversized buttons for easy use. With the
purchase of this remote you should receive a screw for the battery cover. Battery cover
screw is optional; battery cover does not need screw to hold it in place. This remote requires
two AAA size batteries, not included.
Optional Security Cable Attachment
Optional Security Cable available from anderic.com, Part number: CBL01 . This cable easily
adheres under the battery cover for a secure and flush appearance.
Pre-programmed Codes
The RR2HD is pre-programmed by default to LG, Vizio and Philips TVs under TV mode and
Time Warner under SAT/CBL/DTC Mode (i.e. “STB (set-top-box) mode”). If the TV or STB is
not one of the brands above, you must program the remote using the directions below:
Programming the remote: Direct Code Input Method
1. Turn on the device you want to control, and find the corresponding brand code from attached
code list.
2. Press and release the device mode key you would like to program ( [TV] or [SAT/CBL/DTC] ).
3. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light
lights and remains on, release both keys.
4. Input the four digits code. If remote successfully saved code, indicator light will go out. If error,
indicator light will blink slowly three times and go out, repeat steps 1-4.
a. Check if most keys of remote control can control the device, if not, please restart step 1-4
using a different code.
b. After trying all codes for your brand without success, please try “Programming the remote
- Code Search” method below.
Note: During the programming mode, pressing any button other than number buttons or not pressing any
button for 30 seconds will cause remote to exit programming mode.