Anderic RMC12015, Руководство по установке

Страница: 2 / 11

For a full operating manual for your TV go to www.ReplacementRemotes.com .
Activating Master TV Setup Menu
The Anderic RR2573 is the Master remote for your Philips and Magnavox
commercial televisions. These simple instructions will help you convert your TV
from “Commercial Mode” to “Consumer Mode” for full access to the menus.
Check to see if your TV is in Commercial Mode or Consumer Mode .
1. Press “ RC5 ” MODE button at bottom of remote. To put remote in correct
mode.
2. Press “ RECALL ” button on the remote. The TV Status menu will appear
(shown below).
3. Look at line #11 of the onscreen menu to see if the TV is in Commercial or
consumer mode.
Note: If Line #11 says “COMMERCIAL” mode then you must change this mode to
“Consumer Mode” in order to grant access to the full setup menu. Please use the
following steps to change it.
Changing from Commercial Mode to Consumer Mode:
1. Press “ RC5 ” MODE button at bottom of remote. To put remote in SETUP
mode.
2. Press “ Menu ” button on remote. This will activate the TV Setup Menu.
3. Press number keys “ 024995” (or “319753”) followed by the
“ Menu ” button on the remote.
The TV Setup Menu will appear.
Note: the following steps may vary depending on model of TV.
4. Using the directional pad on the remote, Highlight “commercial mode,” and
Press “
LEFT ARROW ” or “ RIGHT ARROW ” to select “Consumer Mode.”
5. To exit, press “ DOWN ARROW ” followed by “ RIGHT ARROW ” to store your
setting.
6. Highlight STORE and press the “ RIGHT ARROW ” button on remote to store
the change. The TV will turn off. You are now in Consumer Mode and should
have full access to your menu options.