User manual
Guangzhou Andea Electronics Technology Co., Ltd. 12/16
http://www.gzandea.com
5.1.5.
System Work Mode
Figure 14
Configuration interface for system work mode
⚫
Mode:
1) Host mode: the host software needs to send commands.
2) Scan mode: the inventory can be automatically completed, even if the host
software does not send commands; scan setting in the scan mode should be
configured in advance.
⚫
Scan Mode Configuration:
1) Filtered time of duplicated tag(sec): The tag can only be counted again after
leaving for the specified time.
2) Port of data output: Uart1 output, USBHID output, virtual keyboard output,
Wiegand 26, Wiegand 34.
3) Scan option
①
Output UID: output the tag UID.
②
Output block’s data: output the content of the data block (not including the
security status byte).
③
Output format of block’s data:
A. Format as hex string.
B. Format as ASCII.
