Andea Electronics RL863, Руководство пользователя

Страница: 15 / 18

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 12/15
http://www.gzandea.com
After the above steps, you can read and write tags, as shown below:
Figure 13 Single tag reading and writing steps
Steps:
1) Set the data block of the tag to be operated in the Addr drop-down box and the
Num drop-down box. After setting, the operable data block is displayed in green
indicating that it can be operated;
2) Click [Read Block] to read the data value of the data block selected in step 1;
3) Write the value in the line (green area) of the data block whose value should be
written, and then click [Write Block];
4) After the operation is completed, click the [Disconnect] button to disconnect the
tag connection.
6. Troubleshooting Of FAQs
1. The indicator of the reader is off:
Failure analysis:
1)There is a problem or poor contact in the reader's communication interface;
2)The reader indicator is broken.
Troubleshooting method: reconnect the reader or change a USB cable to connect
the reader:
1) The indicator is off and the reader does not work. It may be the reader MCU
failure;