A. Open hand dryer back Terminal Block cover.
B. Connect live wire(Coloured Brown, Red, or Black) to the terminal block marked “L”.
C. Connect neutral wire(Coloured Black, Blue) to the terminal block marked “N”.
D. Replace Terminal Block cover.
E. Hang hand dryer on Wall Bracket [ G ]. Slid it lightly from up to down then it is locked.
7. If hand dryer is supplied with cable & plug then do up action “ E ” to hang hand dryer.
8. Move the hand dryer bottom Switch Cover. Lock hand dryer by two theftproof screws.
9. Before replace Switch Cover:
A. Check if the hand dryer power switch ON [ Left switch ].
B. There is an option to run the dryer heat element On or OFF[ Right up switch ].
C. There is an option to run air speed High or Low [ Right low switch ].
There switch is clearly marked too.
10. Replace the Switch Cover.
CIRCUIT BREAKER [By others]
Dia.
Φ8ΜΜ[5/16"]
3
HARD WIRE ONLY