AND UB-525, Инструкция по эксплуатации

Страница: 12 / 20

English 11
Turn off
Recalling the Memory Data
Note: This device stores the last 60 measurements in memory.
1. Press the button when turning the device off.
The average of all measurements and the number of data are displayed.
If no data, “0” is displayed. Press the or
START
button to turn the
device off.
2. Use the following buttons to display data (of number and measurement data).
The device displays the average of all measurements and the
number of data are displayed.
Pressing the button each time , the device displays as follows :
Average data of all measurements taken between.
Data (of number and measurement data).
The device displays in order from most recent data.
In the example : No.30 & data No.29 & data No.01 & data.
3. If you press the button after oldest data is displayed, the device
proceeds to step 1, the average of all measurements and the number of
data are displayed.
4. Press the
START
button to turn the device off.
After one minute of non-operation, the device will turn off automatically.
Deleting Data Stored in Memory
1. Press and hold the button until turning off the device automatically.
The device displays the mark, deletes data stored in memory while blinking
the mark and turns off automatically.
button
Turn off
Memory mode
Average of all the data
Number of all data
Ex.: No.30
Most recent data
Last data (Oldest)
button
button
button
button