
E-4
LifeSource Health Line (Toll-Free): 1-888-726-9966
Y
ou must install 4 type AA (1.5 volt) batteries (included), or use the optional AC
Adapter (see page E-11 for instruction on using the monitor with the optional AC
adapter) and attach the cuff to the monitor before using it. To install batteries (or
replace them if the “Low Battery” symbol appears on display), proceed as follows:
1. Remove battery compartment cover by gently pushing down on arrow and sliding
cover forward.
2. Put in bottom row of batteries first. Place the batteries in
compartment with positive (+) and negative (–) terminals
matching those indicated in the compartment. Be sure
batteries make contact with compartment terminals.
3. Replace cover by sliding it into the compartment and
gently pressing into place.
NOTE: Rechargeable batteries will not work with this monitor.
Follow these instructions to get started using your new wireless UA-851THW Blood
Pressure Monitor. (Note: if you already use another Wellness Connected family device,
please skip this section and simply add your new UA-851THW device in the Devices
tab of your Wellness Connected software in the account section or your ActiHealth
account.)
Setting up Wellness Connected on your personal computer:
(a) Go to the following Internet web address:
http://www.LifeSourceOnline.com/getstarted
(b) Download the Wellness Connected Tracking Software and follow the
instructions to install the software.
(c) Run the software and complete the walkthrough set-up and registration process.
gETTINg STARTED
?
INSTALLINg THE BATTERIES
?!
Step 1
Step 2
Step 3