AND UA-767F-W, Инструкция по эксплуатации, Страница: 10 / 132

English 8
Operation Mode
1. Normal Measurement
Press the
START
button. Blood pressure is measured and the data is
stored in memory. This device can store the last 60 measurements for each
of the four user in memory.
2. Recalling the Data
Press the or button to recall the data in
memory. The average of all measurements is
displayed, as indicated in the figure at the right.
Then, each time the button is pressed, the
memory data is displayed as follows.
Most recent data (No.n, in the example, No.35)
Last data (No.1)
For details on recalling the data, refer to the
section “Recalling the Memory Data”.
(Refer to
page 18.)
3. Changing user for memory display
Press the
SET
button while a memory is displayed.
The user is changed, and the average of
measurement values for that user is displayed.