AND HV-15KCWP, Инструкция по эксплуатации, Страница: 23 / 72

21
□
When the ZERO key is pressed while an accumulation count or value is displayed, the
accumulation data is reset to zero. (When the display returns to weighing mode, the M+ is
turned off.)
□
When the PRINT key is pressed while an accumulation count or value is displayed, the
accumulation result (accumulation count and value) can be output. (When using the optional
HVW-02BCWP: USB interface or optional HVW-03CWP: RS-232C interface.)
□
Select the accumulation conditions with function item 5um .
Function setting Description
5um 0 Accumulation function not used.
5um 1
When the weighing value is a positive stable value and not "near zero", if the
M+ key is pressed, the value is accumulated.
The next accumulation can be performed after the display becomes "near zero"
or a negative value.
5um 2
When the weighing value is a positive stable value and not "near zero", if the
M+ key is pressed, the positive value is added to the accumulation value.
When the weighing value is a negative stable value and not "near zero", if the
M+ key is pressed, the negative value is subtracted from the accumulation value.
The next accumulation can be performed after the display becomes "near zero".
5um 3
When the weighing value is a positive stable value and not "near zero", the
value is accumulated automatically.
The next accumulation can be performed after the display becomes "near zero"
or a negative value.
Use: To weigh each article and accumulate the count and total mass value.
5um 4
When the weighing value is a positive stable value and not "near zero", the
positive value is added to the accumulation value automatically.
When the weighing value is a negative stable value and not "near zero", the
negative value is subtracted from the accumulation value automatically.
The next accumulation can be performed after the display becomes "near
zero".
* Near zero means a range of –4 d to +4 d in kg (d = readability(scale interval or "division")).