AND Device Net.Interface AD-4402 OP-21, Инструкция по эксплуатации

Страница: 14 / 28

Page 12 AD-4402 OP-21
5.3.3. 5.3.3. 5.3.3. 5.3.3. Read Command List Read Command List Read Command List Read Command List
Command Name Command No. Note
Material name 1 (1st to 4th character) 1
Material name 2 (5th to 8th character) 2
Material name 3 (9th to 12th character) 3
Material hopper 5
Final 6
Free fall 7
Preliminary 8
Optional preliminary 9
Over 10
Under 11
Zero band 12
Full 13
Tare 14
Supplementary flow open timer 15
Supplementary flow close timer 16
Manual free fall compensation 17
Initial dribble supply 18
Initial medium supply 19
Total weight 20
Total count 21
This data is stored in each
material code.
Specify a material code No.
before the input.
A material code No.
specified at "
Material code
to store (33)" of " Write
command ".
During setting, material
code No. can check by
"
Material code to
store (33)" of " Read
command ".
Current material code 32
Material code to store 33
Weighing result 36 Last result is read.
Recipe name 1 (1st to 4th character) 40
Recipe name 2 (5th to 8th character) 41
Recipe name 3 (9th to 12th character) 42
Material 1 44
Material 2 45
Material 3 46
Material 4 47
Material 5 48
Material 6 49
Material 7 50
Material 8 51
Material 9 52
Material 10 53
Total weight 54
Total count 55
This data is stored in each
recipe codes.
Specify a recipe code No.
before the input.
A recipe code No. specified
at "
Recipe codeto to store
(57)" of " Write command ".
During setting, recipe code
can check by "
Recipe code
to store " of " Read
command ".
Current recipe code 56
Recipe code to store 57
Error information 60 Refer to 5.4.Error information
Decimal point 61
Current tare 64 Tare = Gross - Net
Bit 0 ~ 12 of last ch in OUT DATA