Ancona Trina 30, Руководство пользователя

Страница: 11 / 42

INSTALLATION FOR WALL MOUNT CONTINUE:
Step 4: Installing the chimney and hood
• Align range hood to the hood mounting bracket hook on the wall and hook hood into place. (See Fig # 4)
• Remove the protective film from the chimney. Attach the lower chimney bracket to the lower chimney using the screws
supplied. (See Fig # 5)
• To avoid scratches, carefully slide the upper chimney down into the lower chimney. Slowly extend the upper chimney and
attach to the upper chimney bracket using the screws supplied. (See Fig # 6)
Upper chimney
Lower chimney bracket
Lower chimney
Step 5: Finishing installation
• P lace the two grease receptacle trays in the slot at the bottom of the range hood. (See Fig # 7)
• To install the 2 (30”) or 3 (36”) filters (See Fig # 8) follow the following steps:
- Angle the filter into slots at the back of the hood.
- Push the button on handle of the filter.
- Release the handle once the filter fits into a resting position.
- Repeat to install all filters.
SAFETY WARNING: Risk of electrical shock. This range hood must be properly grounded. Make sure
this is done by a qualified electrician in accordance with all applicable national and local electrical codes.
Before connecting wires, switch power off at service panel and lock service panel to prevent power from
being switched on accidentally.
11