Operation and Maintenance Instructions
•
After installation, connect the electric power and turn on the switch. The indicator light will show red and
the towel warmer will start to work.
•
Turn off the switch when the towel warmer is not in use. The indicator light will turn dark and the towel
warmer will stop working.
•
Clean the towel warmer with a soft dry towel. Do not clean with abrasive cleaning powder.
PROPERLY HANG
TOWELS.
DO NOT OVERLAP
TOWELS
.
CAUTION - Overlapping towels may increase towel warmer temperatures.
•
Towel warmers are designed for heating towels and bathrobes and should not be used for other purposes.
The manufacturer or reseller assumes no liability if the device is used in combination with equipment or
accessories not sold by the manufacturer.
•
Never stand, sit or climb on the unit.
•
This towel warmer operates at high temperatures that can cause burns. Do not touch surfaces of the towel warmer
while the warmer is in operation. The unit is designed to warm up towel and may become very hot.
•
Do not allow unsupervised children in the vicinity of the towel warmer; and warn children of hot surfaces. An adult
must supervise when the device is used by or near children.
•
Unplug the unit and ensure that the electrical circuit breaker is off the main panel before wiring, carrying
out a repair or servicing your heated towel warmer.
•
Do not place your towel warmer inside a shower, sauna or plunge into the water.
•
To ensure continued protection against risk of electric shock, plug the unit into a properly grounded outlet.
•
Approved for domestic use only. Do not use outdoors.
Information : [email protected] or 1-800-350-4562
HIGH OPERATING TEMPERATURE!
