WALL PLUG-IN INSTALLATION
Step 1: Verifying installation parts
-
Ensure all parts for mounting installation were supplied with your towel warmer. (see fig.1)
-
If any are missing, please contact us.
Step 2: Installing wall mount posts (fig. 2)
-
Locate the following parts:
o
d: Metal wall leg
o
e: Screw to set post in main body
o
f: Plastic insert (this insert may already be installed inside the metal post)
o
g: Set Screw (this set screw may already be installed inside the metal post) (see fig.5)
-
Position parts correctly:
o
Plastic insert f) is positioned inside metal leg d)
o
Set screw g) is inserted in metal wall leg d) (see fig.5)
o
If part b) is inserted in part d) remove it
-
Install wall leg d)
o
Position wall leg d) on the main body where the screws can be inserted
o
Insert screw e) and screw wall leg into main body using appropriate sized Allen key
o
Repeat for all 4 wall legs
24
”
Fig. 2
1.
Approved for domestic use only.
Do not use outdoors.
2.
Do not install in the shower, sauna or any wet
lo
cati
ons
3.
4
. Make sure towel warmer is properly secured
to the wall before use.
Install in accordance with n onal and local
codes
