— 19 —
Installation
STEP 7
Connect to AC
DANGER:
• Please make sure to read ALL safety precautions on pages 4 to 10.
• Electrical Shock Hazard.
• Do not use an adapter.
• Do not use an extension cord.
• Failure to follow these instructions can result in death, fire, or electrical shock.
• Electrical connection must be performed by a qualified service technician in accordance with the kit instructions
and all local codes and requirements.
• The safety circuit-breaker and the electrical system must be able to withstand the load of the appliance. See rating
label on back of appliance.
• Rating plate is located on back of appliance should you need to verify any of the electrical requirements.
• The power supply system should have a ground connection in good working order in accordance with the
regulations in force.
•
The electrical socket must be easily accessible with the appliance installed. In all cases, the power supply lead must
be positioned so that it does not reach a temperature of 50°C (122°F) above the room temperature at any point.
• The manufacturer is not liable for any direct or indirect damage caused by faulty installation or connection. It is
therefore necessary that all installation and connection operations are carried out by qualified personnel, complying
with the local and general regulations in force.
STEP 6
Install Anti-Tip Bracket
To reduce the risk of tipping of the range, the range must be
secured to the floor with a properly installed Anti-Tip Bracket
(included).
All ranges can tip and cause injuries. Install anti-tip device
packaged with range, follow all Installation Instructions.
Failure to install the Anti-Tip Bracket will allow the range
to tip over if excessive weight is placed on an open door
or if a child climbs upon it. Serious injury might result from
spilled hot liquids or from the range itself. If range is ever
moved to a different location, the Anti-Tip Bracket must be
re-installed.
Make sure the anti-tip bracket is installed:
u
Slide range forward.
v
Make sure the anti-tip bracket is securely attached
to the wall behind the range.
w
Safely tilt the front of the range upward slightly and
move back against wall, Making sure the pin slides
under bracket.
Figure 12
