and cabinets around the appliance can withstand heat up to 200º F (93°C) generated by the
appliance. (See Figure 1)
•
Cabinet opening dimensions that are shown must be used. Given dimensions are minimum
clearances. (See Figure 1)
•
Working areas adjacent to the range
should have 18″ minimum clearance between countertop
and cabinet bottom. (See Figure 1)
•
All openings in the wall or floor where range is to be installed must be sealed.
•
Contact a qualified floor covering installer to check that the floor covering can withstand at least
200°F (93°C).
•
Use an insulated pad or ¼" (0.64 cm) plywood under range if installing range over carpeting.
•
The floor anti-tip bracket must be installed. To install the anti-tip bracket shipped with the range,
see “Install Anti-Tip Bracket” section.
•
Grounded electrical supply is required.
See “Electrical Requirements” section.
11
