Ancona 450 CFM, Инструкция пользователя

Страница: 4 / 6

GENERAL INSTALLATION INSTRUCTIONS
PREPARATION
A: GENERAL
 Carefully unpack the hood but do not remove any
protective film until after installation to avoid
accidental damage or scratching. Place filters
somewhere safe for the same reason.
 Check for damage, and lay out the hood pieces and
parts.
 Range hoods do not come with wall or ceiling screws,
as the type of structure determines the type of screws.

Check that you have the right tools. In addition to
marking and measuring tools, a hammer, screwdrivers,
pliers and scissors, you may need sheet metal sheers,
and wire strippers. Safety glasses are recommended.
B: ELECTRICAL CONNECTION
 This range hood must be grounded. If the dwelling
wiring is not 2-wire with a ground wire, a ground must
be provided by the installer.
 Install a 5.08 X 10.16 cm (2” X 4”) wall outlet box and
3-blade 125 Volts, 15 amp grounded receptacle.
 Use wire nuts to connect incoming ground, neutral and
hot.
 Push wires into the junction box and replace cover. Be
sure wires are not pinched.
C- INSTALLATION DISTANCE FROM TOP OF
RANGE
 Hood should be placed at a minimum of:
– 61 cm (24 ”) for electric cooking surface
–
76 cm (30” ) for gas cooking surface
4