3
29. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the utility.
30. For cleaning, please refer to “CLEANING AND MAINTENANCE” section.
WARNING! Do not blend hot liquids. To prevent scalding, DO NOT process boiling liquids or
hot ingredients in the blender. Allow hot ingredients to cool down below 40
0
C before
placing them in the blender.
IMPORTANT!
To prevent damage to the electric motor, the maximum operating time is 1 minute. Allow it
to rest for at least 2 minutes before using it again. After 5 cycles of operation, allow the
blender (electric motor) to cool down to room temperature, allow it to cool down for
approx. 30 minutes before using it again.
Note: The appliance incorporated with a non-self resetting thermal motor protection circuit
to protect the motor from overheating. If the motor shuts OFF while in use, unplug the unit
from main power outlet. Remove the blending jar from motor unit and free the blade of any
obstructions. Allow the unit to cool down for at least 1 hour. After then, plug the unit back
into mains power for normal operation.
