USING AN OUTBOARD CD/TAPE PLAYER
Use the LINE IN input jack to play pre-recorded material through the MiniVox Lite. The MiniVox Lite volume knob
controls both the audio source and microphone levels when used simultaneously.
1. Connect a mini-to-mini
patch cable
(3.5mm
plugs) to the ‘Line’ or
‘Headphone’ output of
your audio source
2. Connect the other end
to the LINE IN input
jack on the MiniVox Lite
control panel
3. Adjust the volume set-
ting of the audio source
to the desired level
DIVERSITY WIRELESS BY ANCHOR AUDIO
Anchor Audio UHF wireless is a 16 channel, diversity wireless system that utilizes two independent antennae to
receive signals. The diversity feature means the receiver will process the stronger of the two antenna signals, ef-
fectively minimizing dropouts and interference from other transmitting sources. The antennae are mounted in-
ternally so there are no obstructions or risk of damage.
CHANNEL SELECTION - BUILT-IN RECEIVER
Before you can use your UHF wireless system, you will need to select a wireless frequency, set the built-in receiver,
and microphone transmitter, to that channel.
1. Choose from any of the 16 available wireless channels
2. Set the wireless channel selector knob “CHANNEL” to the channel/frequency you have chosen
UHF WIRELESS ACCESSORIES
WH-6000:
16 channel wireless handheld microphone/transmitter
WB-6000:
16 channel wireless body-pack transmitter for hands free microphone
(microphone not included - see below)
CM-60:
Lightweight, low-profile collar microphone - works w/ the WB-6000 transmitter
EM-60T:
UltraLite “Over-the-Ear” hands free microphone - works w/ the WB-6000 transmitter
LM-60:
Lightweight, clip-on lapel microphone - works w/ the WB-6000 transmitter
HBM-TA4F:
Ultra-lightweight headband microphone - works w/ the WB-6000 transmitter
3
6
AUDIO SOURCE
HEADPHONE / OUTPUT
JACK
NOTE: If you experience ongoing interference with your wireless system,
the selected frequency may be incompatible w/ other systems
in the area. Try different channels to find a clear frequency.
UHF WIRELESS CHANNEL SELECTION
RX INDICATOR LIGHTS
MINIVOX LITE
WIRELESS CONTROLS
Model Shown: PB-30U1
RECHARGEABLE BATTERY KIT (OPTIONAL ACCESSORY)
For applications where the MiniVox Lite PA system is used frequently, the RC-30 rechargeable battery kit is available.
This kit includes 10 rechargeable NiMH batteries and an AC charging adapter. When fully charged the batteries pro-
vide approximately 12 hours of operation.
NOTE: New batteries must be charged for 6 hours prior to first use.
Using the RC-30 Recharge Kit
1. Install the 10 rechargeable NiMH batteries into the MiniVox Lite
(see page 4 - Battery Installation)
2. Insert the charger plug into the Input Jack labeled
DC IN on the MiniVox Lite control panel
3. Plug the AC adapter into a power outlet for 4-6 hours to
fully charge
Cycling the batteries
For extended battery life, we recommend you fully charge the batteries once each month during periods of infrequent
use. Always fully recharge batteries before storing.
CAUTION: NEVER recharge other types of batteries. Doing so can result in battery
explosion. Use only rechargeable Nickel-Metal Hydride (NiMH) batteries.
LINE IN
INPUT JACK
SHIELDED
PATCH CABLE*
*CABLE SOLD SEPARATELY